Process modules can be single or double die cut stations as shown below. They can also be slitters, pattern heat seal, flexo printer, hot melt coater...

Unwinds and rewinds can employ a number of different control schemes depending on the sophistication required. The unwinds and rewinds are mounted on rails and clamped in place.

Other accesories are web guides, idlers, splicing tables, stacker conveyors...

Clamps shown in the image at the left pull the back of the winder or accesory back and down. To remove, the bolt is loosened and the clamp is slid off to the side. This allow rapid but secure mounting and unmounting of accessories.

The SM press has rails along its top and sides to allow a number of accesories to be mounted.